Solutions >
 – In-Process Inspection, Analysis

Reduce in-process dimensional inspection to the 1 Predictor Dimension in 1 cavity.

Many processors perform—and many customers require—in-process inspection to increase
confidence that good parts are being made.

A 32-cavity mold with 4 in-process dimensions means 128 dimensions checked once or
twice a shift. With Algoryx, the 128 in-process measurements are reduced to 1 dimension in 1 cavity.

Algoryx recommends that processors perform visual inspection in addition to measuring the
Predictor dimension.

Reduce the number of in-process gauges from several to 1.

Some processors use go/no-go gages to check in-process dimensions during production
sampling. Algoryx reduces the number of go/no-gages from several to 1 go/no-go gauge for the
Predictor Dimension.

Some high-tech processors use—and some high-tech customers require—automated variable
data gages for measuring parts and inputting the measurement data into SPC and Cpk
software programs. These gages can be expensive, costing $10,000 or more for each in-process
dimension.

Algoryx reduces the number of expensive automated variable data gauges from several to 1
gauge for the Predictor Dimension.

Reduce in-process SPC and Cpk analyses to the 1 Predictor Dimension in 1 cavity.

Some processors perform—and some customers require—in-process SPC and Cpk analysis
to increase confidence that the mold/press is producing parts that are a.) in-control and b.)
capable during production.

A 32-cavity mold with 4 in-process dimensions means doing SPC and Cpk on 128 dimensions for
each in-process sample.

With Algoryx, in-process SPC and Cpk analyses are reduced to 1 dimension—the Predictor
Dimension—in 1 cavity.

Take the Algoryx Challenge – See how much you can reduce inspection, analysis and gauge costs during production!